- Self-priming
- High gloss
- Direct to substrate
- Durable
- VOC-compliant
- Water-reducible
- Dries fast, minimum downtime
- Outstanding color and gloss retention
- Interior or exterior use
- Wide color range
- Brush, roll or spray
EWB-36 is a high-performance waterborne epoxy acrylic coating for
steel, concrete, masonry, wood, galvanizing, aluminum substrates, previously painted surfaces V.C.T. tile
and similar. Combining the long-term protection of epoxy with the gloss and color retention of acrylic,
EWB-36 provides a lustrous, stain-resistant, cleanable finish that retains its attractive appearance far
longer than two-component solvent epoxies and traditional systems.
EWB-36 requires minimal surface preparation, usually only power-tool cleaning or metal etching. It dries
much faster than solvent VOC-compliant epoxies and conventional epoxy acrylics.
Low-hazard, low-odor EWB-36 meets air quality regulations and cleans up easily. EWB-36 resists splash and
spill of most household and industrial chemicals, provides excellent long-term protection in industrial and
chemical environments. Washable and scrub resistant, EWB-36 withstands steam cleaning. Good abrasion
resistance makes EWB-36 a durable coating for floors, walls and other high-wear areas.
- Floors, walls
- Institutional maintenance and new construction
Schools Kitchens Laboratories
Hospitals Storage areas
- Industrial maintenance and new construction
Tank exteriors Piping
Equipment Structural steel
- Marine applications
Vessel topsides and interiors
Offshore platform topsides and interiors
Coated surfaces: May be applied over most existing coatings, including
alkyds, epoxies, vinyls, polyurethanes, acrylics. To ensure good adhesion, conduct a compatibility test over
clean, intact area or roughen the surface with light abrasive blasting or sanding.
|
Finish: Gloss
Color: Standard & custom
Uniform appearance may require two coats of white or pastel colors over
dark substrates.
Components: 2
Curing mechanism: Drying; chemical curing (crosslinking)
Volume solids (ASTM D2697 modified)
EWB-36 colours: 43 ± 3%
clear: 36 ± 3%
Dry film thickness per coat: 2 to 3 mils (50 to 75 microns)
Coats: 1-2 (see systems)
Theoretical coverage
1 mil (25 microns)
EWB-36 in colours: 689 ft2/gal or 17 m2/L
clear: 577 ft2/gal or 14 m2/L
3 mils (75 microns)
EWB-36 in colours: 229 ft2/gal or 5.6 m2/L
clear: 192 ft2/gal or 4.7 m2/L
VOC
mixed: 217 g/L to 288 g/L
Flash point (SETA)
cure: 117°F or 47°C
resin: 175°F or 79°C
mixed: 155°F or 68°C
USDA — incidental food contact
NFPA — Class A
|
