Anti-Slip Floor Coatings

Home  |   Back  |   Products  |   Email Us  |   Inquiry Form  |   Contact Us

No Skidding® ES-83-1 Two Part, Anti Slip Floor Coating
One gallon kit, Matt Finish

ES-83-1 Two Part
High-solids, fast dry, one gallon, two component slip resistant epoxy protective coating for tough industrial and commercial applications. Supplied as a matt / flat. A coating that is especially formulated to help solve slip injury problems with minimal surface preparation.

A tough and durable coating with excellent resistance to weather, moisture, sunlight and chemical fumes. An excellent direct-to-metal protective coating for new, unpainted surfaces. It meets existing VOC regulations.

Durable anti-slip protection for most industrial settings, commercial environments and is suitable for new construction, repair and maintenance where a durable slip resistant surface is required.

A tough coating that seals and protects in just one application. It is an excellent all-in-one primer and topcoat for new and existing floors in industrial and commercial facilities. It resists high humidity and moisture.
ES-83-1 is an abrasive, heavy duty, non-slip floor coating formulated with epoxy resins to give maximum adhesion, is tough, anti slip and corrosion resistance.

  • Anti Slip Traction supplied with kit.
  • High build, high performance.
  • Fast dry.
  • Fast curing.
  • Application over wide range of surface temperatures.
  • Self-priming.
  • VOC compliant.
  • Resists corrosion.
  • Can be immersed in salt or fresh water.


  • Colors Available:

    Grey | Black | White | Red Oxide (color chart below)

    Theoretical coverage is 180 sq. ft to 220 sq. ft. per one gallon kit @ 5 mils dft.

    Volume Solids:  67% +/-2%


    Packaging:
    Available in 1 gallon kits. 

    Mixing ratio by volume : 4 part Resin to 1 part Cure. Pre-mix resin with a power mixer at moderate speeds to blend the components. Add cure to resin and agitate with a power mixer for 1-2 minutes until completely dispersed.  Then add one pouch of anti slip aggregate as supplied per full gallon of ES83-1 to impart anti slip properties

    Pot Life:

    50ºF/10ºC

    70ºF/21ºC

    90ºF/32ºC

    5 Hours

    4 Hours

    2 Hours

    Induction Time: None required
    Roller: Use a high quality solvent resistant, 3/8” nap phonolic  core  roller. Ensure roller is well loaded to avoid air entrapment. Multiple coats may be necessary.
    Cleaning Solvent: Xylene
    Safety Precautions: See MSDS. This is a solvent borne paint and care should be taken to avoid inhalation of vapour also as contact between the wet paint and exposed skin or eyes.

    Dry/Cure times ES-83-1 (Approximate):

     

    20ºF/-6ºC

    32ºF/0ºC

    50ºF/10ºC

    70ºF/21ºC

    90ºF/32ºC

    Dry to touch

    2 hours

    1.5 hours

    45 minutes

    30 minutes

    20 minutes

    Dry through

    20 hours

    8 hours

    4.0 hours

    1.5 hours

    1.50 hours

    Dry to recoat/topcoat

    3 hours

    2 hours

    1.5 hours

    45 minutes

    30 minutes

    Dry times do depend on air and surface temperatures as well as on film thickness, ventilation and relative humidity.

    Surface must be clean and dry. Any contamination must be removed.

     

    ES-83-1 Color Chart
    Due to individual computer monitor limitations, colors seen here may vary and may not accurately reflect actual colors supplied. To confirm your color choices, please request a sample via sales@noskidding.com. In addition color samples shown include traction grit supplied with product as part of the kit.





    Home       |       Email-us       |       Inquiry Form       |       Contact Us
    Copyright © 1997-2013 NO SKIDDING PRODUCTS INC.