Anti-Slip Cleaner and Application suitable for many varieties of floors including:

Ceramic Tile | Quarry Tile | Concrete | Brick | Painted or Sealed Floors | Vinyl | Wood | Marble and more.

General use cleaner formulated to clean and slip treat. Dries to a matt finish. Can be buffed. Highly Concentrated. Water based. SRC^TM differs from other floor cleaning products by deep cleaning and simultaneously treating the floor with slip reducing compounds that increase the coefficient of friction of the floor surface thereby reducing the potential for slip and fall accidents. Suitable for theatrical stages, factories and warehouses, restaurants, offices, malls, schools, loading docks, and anywhere indoors where slippery floors are a problem.

Features:

• Interior use, Zero VOC's, Natural look, Easy to use, Cost effective
• Increases Slip Resistance, Self-Neutralizing
• Concentrated, UL® Classified for slip resistance.
• Exceeds SCOF requirements for ASTM, OSHA, ADA. CFIA compliant.
• For interior use on commercial & residential floors.
• CFIA Compliant
• Helps reduce the potential for slip and falls. No rinsing required. Formulated for use over acrylic floor finishes or carnauba based floor waxes on vinyl, linoleum, terrazzo, marble, composite or similar surfaces. Effective for damp mopping or spray buffing.

Container sizes: 1 gallon (3.78 L), 5 gallon (18.9 L), or 55 gallon (207.9L) drums.

Slip Resistant Cleaner and Maintainer: The process used to manufacture SRC^TM combines the effectiveness of quality cleaning agents with slip resistance. Every time the floor is cleaned with SRC^TM, an invisible monomolecular slip resistant film is left on the surface.

SRC^TM is an effective floor cleaner and treatment. It has been designed to meet a need in the marketplace for a product that would effectively clean soiled floors and simultaneously leave a slip resistant film on the floor. SRC^TM may be used to clean and maintain acrylic polymer floor finishes, as well as synthetic and carnauba based floor waxes.

Highly Concentrated. Only a few ounces of SRC^TM per gallon of water are necessary to clean and slip treat most floor surfaces. SRC^TM has a built in foam control system to minimize foaming.

FAQ
Q1. How does SRC^TM differ from other cleaning products?
A. There are many degreasers and cleaners, which remove grease and soils from floors. In addition to being an excellent cleaner SRC^TM cleans, slip treats and neutralizes with no alkali residues.

Q2. Does S.R.C. contain acids?
A. SRC^TM is acid free. It does not etch floor surfaces.

Q3. Can S.R.C. be used over sealed floors, painted floors, Epoxy floors, Vinyl, glazed floor tiles and coated floors?
A. SRC^TM is a product manufactured using a process that cleans and slip treats. SRC^TM is designed for use over sealed and unsealed vinyl or linoleum.

Q4. When used as a daily cleaner, does SRC^TM require a rinse?
A. After soiled solution is removed from the floor by damp mopping or wet vacuum, S.R.C.^TM is self-neutralizing, DO NOT APPLY a final clear water rinse. Unlike other products, SRC^TM leaves no alkaline residue on the floor.

Q5. Can SRC^TM be used on porous quarry tile?
A. SRC^TM is an effective safety product and cleaner for porous floor surfaces. A strong solution of SRC^TM should be used initially on quarry tiles to deep clean the floor surface removing deposits and residues. Thereafter SRC^TM may be used diluted on a daily basis to keep the floor safe and clean.

Q6. Can SRC^TM be used on Marble or Granite?
A. SRC^TM can be used on marble, granite and other natural stone surfaces.

Q7. What is the suggested water temperature with SRC^TM?
A. Use SRC^TM with any water temperature. Hot water works best with heavily soiled or greasy areas.

Q8. Is SRC^TM a germicidal cleaner?
A. SRC^TM is an effective daily floor cleaner and safety treatment. It is not a germicidal floor cleaner.

Q9. What coverage will we get with SRC^TM?
A. The average coverage for mopping with SRC^TM will vary from a few hundred to several thousand square feet per mop bucket. The variability in coverage is a result of the different soil loads from one surface to another. The mop water should be changed frequently under heavy soil loads.

Directions For Use
Use this procedure on epoxy, glazed, coated or painted floors. Apply by mop or automatic scrubber. Re-apply initial slip treatment procedure when necessary.

1. DILUTE 12 to 14 oz. Of SRC^TM per gallon of hot water.
2. SWISH mop in SRC^TM solution and leave dripping wet.
3. MOP 10 ft. X10 ft. area.
4. RINSE mop in bucket to clean mop.
5. WRING mop dry.
6. DAMP mop 10 ft. X 10 ft. area.
7. REPEAT steps 2 through 6 to finish floor.
8. ALLOW TO DRY, do not do a final rinse with clean water.

Procedure
For intensive cleaning of accumulated tough soils in tile and grout.
1. ADD 4 oz. SRC^TM to 1 gallon of hot water.
2. SPREAD hot SRC^TM solution liberally with mop.
3. SCRUB floor thoroughly with deck brush.
4. SQUEEGEE soiled solution to drain or central area for easy pick-up. If floor drains are not available, wet vac or damp mop solution off floor in 10 ft. by 10 ft. areas.

Wet Mop Procedure (For Heavy Built-Up Soils)
1. ADD 4 oz. SRC^TM to 1 gallon of hot water
2. SWISH mop in SRC^TM solution and leave dripping wet (WET MOP).
3. WET MOP 10 ft. by 10 ft. area.
4. RINSE mop in bucket to clean mop.
5. WRING mop dry (DAMP MOP)
6. DAMP MOP 10 ft. by 10 ft. area
7. REPEAT steps 2 through 6 to finish floor.

Damp Mopping (No Rinse, for Light Soils)
This product is self-neutralizing. Do not apply a clear water rinse. If rinsing is desired, use SRC^TM diluted 4 oz. per gallon of water.
1. Add 2-4 oz. of SRC^TM to 1 gallon of hot water.
2. SWISH mop in SRC^TM solution.
3. WRING mop dry (DAMP MOP).
4. DAMP MOP 10 ft. by 10 ft. area.
5. REPEAT step 2 through 4 to finish floor.

Important All Applications
DO NOT APPLY A FINAL CLEAR WATER RINSE.
If a final rinse is desired, use solution of water with SRC^TM diluted as instructed. This product cannot totally eliminate the possibility of slipping.